5083 Aluminium Wires
5083 Aluminium Wires
Aluminium Alloy 5083 Wires, Aluminium Alloy UNS A95083 Wires Supplier in India
Aluminium Alloy UNS A95083 Wires Exporter, Aluminium Alloy 5083 Wires, Aluminium Alloy ASTM B209 Wires
JAGDISH METAL are suppliers of Aluminium Alloy 5083 Wires, Aluminium Alloy 5083 Wires. Aluminium 5083 is an aluminium magnesium alloy which can be hardened by cold work: it is not heat treatable to higher strength
Aluminium Alloy 5083 Wires is profoundly utilized as a part of marine applications because of its magnificent protection from general erosion. It has the most elevated quality of the non-warm treatable composites however isn't prescribed for use in temperatures over 65°C.These wires find application in high-stress applications, trusses, bridges, cranes, transport applications, or skips, barrels, and milk churns
Specification Of Aluminium Alloy 5083 Wires
| Grade | : | Aluminium Alloy 5083 (UNS A95083) |
| Size Range | : | 15NB to 150NB In |
| Width Range | : | 900-1500 mm |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard etc. |
| Diameter of Wire | : | 0.15 - 3.50 mm |
| Test Certificates | : | Manufacturer Test Certificate / Laboratory Test Certificate from Govt. Approved Lab |
Chemical Composition Of Aluminium Alloy 5083 Wires:
| Weight% | Al | Si | Fe | Cu | Mn | Cr | Mg | Ti | Zn | Other Each | Others Total |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5083 | Bal | 0.40 max | 0.40 max | 0.10 max | 0.40 / 1.0 | 0.05 / 0.25 | 4.0 / 4.90 | 0.15 max | 0.25 max | 0.05 max | 0.15 max |
Mechanical Properties Of Aluminium Alloy 5083 Wires:
| Properties | Metric |
|---|---|
| Proof Stress | 125 Min MPa |
| Tensile Strength | 275 - 350 MPa |
| Hardness Brinell | 75 HB |
| Elongation | 12 Min % |