Aluminium Alloy 7050 Pipes & Tubes, Aluminium Alloy AMS 4050 Pipes & Tubes
Aluminium Alloy 7050 Pipes & Tubes, Aluminium Alloy UNS A97050 Pipes & Tubes Supplier in India
JAGDISH METAL are producer of broad range 7075 Aluminium Alloy Pipes & Tubes and we additionally give our client most satisfiable esteem list for Aluminium Alloy.
Since it is less quench sensitive than most other aerospace alloys, this alloy maintains its strength properties in thicker sections while retaining good stress corrosion cracking resistance and fracture toughness levels.we offer Aluminium Alloy 7050 Pipes & Tubes in different sizes, thickness, standards and shapes as indicated by changed requirements given by our clients.
Specification Of Aluminium Alloy 7075 Pipes & Tubes
| Standards |
: |
1" through 16" |
| Grade |
: |
Aluminium Alloy 7050 (UNS A97050) |
| Size |
: |
8 (1-1/2" / 1.900") |
| Length |
: |
Single Random, Double Random & Cut Length. |
| End |
: |
Plain End, Beveled End, Treaded. |
| Form |
: |
Round, Square, Rectangular, Hydraulic Etc |
| Schedule |
: |
SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
| Type |
: |
Seamless / ERW / Welded / Fabricated / LSAW Pipes |
Chemical Composition Of Aluminium Alloy 7075 Pipes & Tubes:
| Grade |
Element |
|
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Zn |
Ti |
| 7050 |
0.12 |
0.15 |
2.0/2.6 |
0.10 |
1.9/2.6 |
0.04 |
5.7/6.7 |
0.06 |
Physical Composition Of Aluminium Alloy 7075 Pipes & Tubes:
| Properties |
Metric |
Imperial |
| Density |
2.6-2.8 g/cm3 |
0.0939-0.101 lb/in3 |
| Melting point |
494°C |
920°F |
Mechanical Properties Of Aluminium Alloy 7075 Pipes & Tubes:
| Properties |
Metric |
Imperial |
| Tensile strength |
515 MPa |
74695 psi |
| Yield strength |
455 MPa |
65992 psi |
| Fatigue strength |
240 MPa |
34809 psi |
| Elastic modulus |
70-80 GPa |
10153-11603 ksi |
| Poisson's ratio |
0.33 |
0.33 |
| Elongation |
11% |
11% |